Stretch Fabric Walls

Stretch Fabric Walls are made up of two main components: a strong, lightweight, tubular aluminium frame and a printed fabric cover.

The 260gsm 'stretch' fabric cover is printed on the front with a white reverse as standard and is designed to fit snugly over the frame. It is then secured at the bottom with a zip fastening to maintain tension.

Assembly can be performed by one person, but in most cases we recommend at least two people to apply the graphic. Assembly time is approximately 10 minutes.

The graphics are printed with a VUTEk FabriVU 340, resulting in a rich and vibrant finish which is excellent for exhibition and indoor displays. Graphics fold up and fit in the bag, making these units light and easily transportable.

The fabric cover is washable and easily changeable. Additional or replacement graphics can be ordered separately. Old graphics can be recycled with other textiles.

• Lightweight and strong aluminium hardware components.
• Includes a bespoke-printed graphic (either 2.4m/3m/4m/5m/6m wide)
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost.
• Bespoke-printed graphic on Stretch Fabric.
• Printed in-house on a VUTEk FabriVU 340.
• Finished in-house by our team of sewing machinists.
• Includes a carry bag that contains the unit hardware for easy portability and transportation. For some of the smaller sized frames, the graphic can also fit inside the carry bag. Larger graphics will need to be transported separately.
• Straight frames only: assembly requires one allen key (included).

There is no additional charge for more than one design or artwork for your order, no matter how many walls you are ordering or whether you are ordering single-sided or double-sided stands.

What You Get

• Snap-fit aluminium frame
• Stretch fabric graphic (printed either single or double-sided)
• Allen key (straight frames only)
• Carry bag
• Set of gloves for applying the graphic

Need help setting it up: Check our handy video

Please see templates below for your design team:

2.4m template 

3m template

4m template

5m template

6m template

Artwork Requirements

Artwork must be supplied:

• Without crop marks or other registration marks
• Using the full bleed area (6mm at template scale / 30mm at full size)
• With any fonts outlined
• With any images embedded
• With any template elements (such as lines, boxes and markings) removed
• As either PDF (preferred), AI or EPS format

Considerations

Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.

Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.

While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics (applicable only to double-sided graphics).